Low headroom garage door – Your garage door using a series of hinges and fixtures to hold the stems of garage door rolls. The slide rolls up and down the door track at the door. The top of the garage door should fit snugly against the trim stop of the opening. If there is a gap allows the journals, it is possible to make a garage door, the upper tighter fit by adjusting the top part of the furniture.
Place a step ladder under the garage door top fixtures. Top fixture is the bracket that holds the stem of the upper roller. If you have a standard door, similar to fitting a tent. Low headroom garage door have a flat top tripod. Loosen the nuts securing the slide to the top of the fixture with a 7/16-inch socket wrench. Roller stem slides into the sleeve of the slide. The slide moves in and out to adjust the upper part. Only loosen the nut one full turn.
Press the upper part of the door against the wooden stop of the opening frame. Moving the slide as necessary to keep the section against the frame. Tighten the nuts to secure the fixture slide. Do the same for the top frame on the opposite side. Loosen the nuts or bolts securing flat top fixture, if you have a low headroom garage door with a horizontal double track. Push the flat bracket slightly. This pushes the section door against the opening stop. Tighten bolts or nuts. Do the same for the top frame on the opposite side.
12 Low Headroom Garage Door Ideas Photos